Everbuild 403 Premium Concrete Hardener and Dustproofer, 5 Litre

Product Information

Topical coatings – these sealers are typically higher solids, 2 component, reaction resin based sealers. Fully penetrating concrete sealer – Densifier Store in cool, dry conditions in a sealed container between 5 & 30 Degrees C. Protect from freezing.

Although priming is recommended for some concrete paints, many products are self-priming and can be applied directly to bare concrete. Be sure to follow the paint manufacturer’s recommendations. Also adhere to the manufacturer’s guidance for minimum air and surface temperatures during application, especially when painting outdoor concrete surfaces. In most cases, temperatures should be above 50° F.Multicrete Products CONCRETE HARDENER AND DUSTPROOFER is not designed to restore damaged concrete. Not for use on stonework or coloured concrete.Must not be used on concrete that is less than 28 days old.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. Creteshield 101– is a Potasium Silicanate. It is at the top of the performance list. An advantage of Creteshield 101 is that it is hydrophobic, meaning it repels moisture. Most densifiers are hydrophilic, meaning they microscopically absorb moisture (they will stop moisture transfer, but over a long period of time they dissolve). Creteshield 101 will increase abrasion reistance by about 40%. Also suitable for greatly reducing Radon Gas. Creteshield 101 is the best product to use as a stand alone densifier. Economical ready to use dustproofer for concrete floors, paths, garage and workshop floors and driveways. Ensure all joints have a minimum full depth width of 5mm and are at least 20mm deep. The paving and joints should be thoroughly wet before application, but joints should be free of standing water, dirt, debris or weeds. Ensure the paving bedding is well drained.Hardens and dustproofs the surface silicate resins to both harden and dustproof new and old concrete floors If we take a look at the first category, a fully penetrating concrete sealer, we need to understand what it does and why we would use it, and where. If we think about them as a product that looks like water, is generally clear or slight colour, and soaks into the concrete. Once it enters the concrete through the pores, it finds and reacts with lime or un-reacted cement (cement is burnt lime). In this article I will discuss clear concrete sealers. We will classify coloured sealers as “concrete coatings”. They still seal the concrete but we will confuse the matter.