ValetPRO Dragon's Breath Wheel Cleaner for All Wheel Types - Removes Iron Fallout and Baked-on Brake Dust Remover - 1 L

Product Information

However, they have also added surfactants to improve cleaning ability, especially useful when cleaning wheels.

It has the infamous iron remover smell so just be mindful when using it on a windy day(!) but the smell is a little nuisance compared to the big positive of making fallout removal easy and very effective. Are your wheels chromed or anodised? If so, choose a pH-neutral product that won’t damage their delicate surface. Each cleaner advises what types of wheels they are suitable for. As the name suggests, it has an unforgettable, unpleasant odour...it smells really bad, but it really works! Give it a try and see for yourself!

Dragon's Breath

Now you have a list of the best iron removers we have used for our professional detailing services and hope you find these products useful in rectifying a problem or simply used to keep your car looking mint. It could be used on all surfaces but wheels were the most popular application due to the high ferrous content that brake pads and brake discs would expel. Despite the strong smell, it worksvery well and was instantly a must-have product in any detailers line up. Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working. More importantly, this chemical reaction also turns iron into a water soluble solution which makes it easy to rinse away baked on brake dust. For the most part Dragon’s Breath will easily clean general road grime away without a need for agitation, however the stubborn baked on brake dust may still require some agitation for the best results. Directions:

Valet Pro have been developing quality detailing products for years. One of their latest developments is their professional fallout remover. It is an effective iron remover for both professionals and hobbyists whilst remaining easy to use.The PRO-KLEEN TROLL’S BREATH immediately begins to turn a deep purple colour as it gets to work dissolving the brake dust particles. The more purple it goes, the more iron fallout is on the wheels. It naturally “pulls” in a downward direction under gravity, pulling iron contamination away from the wheels. Spray the gel/liquid formula directly on to your wheels. Allow the product to settle and dwell for approximately 5-10 minutes. Once the liquid has changed from clear to a shade of purple then rinse the wheels clean with warm water. If necessary, reapply the solution again and agitate with a soft brush.

Buy Bilt Hamber Auto Wheel Online To Make Your Wheel Cleaning Unbelievable! #2 Dodo Juice Ferrous DuellerAs a wheel cleaner it is one of the best available today. It is safe on ALL wheel types, including cars with carbon ceramic brake systems. It also boasts being PH neutral, water based & effective at removing iron contamination. Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working. Despite its claim for low odour, it does still have the unique iron remover odour so take this claim with a pinch of salt..and peg! The solution was easily sprayed onto the wheels and needed time to soak into the baked-on brake dust. To simply leave and rinse in all fairness would not completely clean off any long term “baked on” brake dust and I would be forced to re-apply or work hard with a soft brush to break under the sealed layer of brake pad debris. The “debris” is caused by a build-up of fine brake pad particles. Under the heat of braking, these particles get baked onto the alloy surface. At first, this isn’t too noticeable, but over time it’ll start to show up as a dark grey film known as iron fallout which is nearly impossible to wash off with car shampoo. Despite being labelled as a wheel cleaner it is just as useful and competent at removing fallout and iron contamination from paint & glass.

Use with care, it is a nasty chemical, ALWAYS use rubber gloves and eye protection especially when jet cleaning after application.

This is set by Hotjar to identify a new user’s first session. It stores a true/false value, indicating whether this was the first time Hotjar saw this user. It is used by Recording filters to identify new user sessions. I have used it on aluminium, painted aluminium and steel wheels and if you take care not to leave it on for more than 6 minutes no damage to the wheel is done. This is fairly strong both in performance and smell so you shouldn’t need to repeat the process many times but the longer you leave it, the more it will remove.